Get a free match
Burnaby, British Columbia

Roofing Contractors in Burnaby: Repair, Leaks & Replacement

Describe the roofing problem once and connect with one local roofing contractor from the BC Quote network serving Burnaby — not a list of companies.

✓ One roofer✓ Free request✓ No flood of calls

For roof repair, leaks, replacement, shingles, metal and flat roofing.

Get a free roofing quote

Burnaby · One contractor match per request

Free for homeowners · No obligation to hire

Burnaby roof replacement planner

Build a Burnaby roof-replacement planning range before you request a quote.

Choose the roof size, material, complexity, access and tear-off. The calculator uses BC Quote’s broad planning model with the Burnaby location factor fixed at 1.10. It is a budgeting tool, not a contractor quote.

Free No email required Fast About 1 minute Planning only Not a contractor quote
1Project basics
Burnaby is fixed for this local planner. The location factor adjusts the planning range only.
Use roof surface area if you know it — not the home’s total floor area. If you are unsure, choose the closest estimate; a contractor will measure the roof for an actual quote.

This is a broad planning estimate, not a quote. Hidden damage, decking, ventilation, flashing, specialty access and exact product choice can materially change contractor pricing.

How this planning range is calibrated

The model uses a broad BC asphalt baseline, then adjusts for material, roof complexity, access, tear-off and location. The assumptions were re-checked on September 14, 2026 against published 2026 Greater Vancouver roofing ranges. It is intentionally wider than a contractor quote because a quick tool cannot inspect decking, flashing, ventilation or site conditions.

See the cost assumptions and current sources →
Burnaby roofing decision guide

Plan the roof before you compare contractor prices

Burnaby roofing work can mean a small flashing repair, a leak investigation, a full steep-slope replacement or a low-slope/flat-roof project. The useful comparison starts with the same scope on every quote: roof area, material, tear-off, deck repair assumptions, flashing, ventilation, disposal and cleanup.

Burnaby roofing: what to identify first

Record the building type, approximate roof age, visible material, where water is appearing and whether the issue happens in every rain or only during wind-driven storms. Note skylights, chimneys, wall intersections, roof decks, additions and low-slope sections because those transitions often control the repair scope.

Estimate a Burnaby replacement range → · Start a Burnaby roofing request →

Repair, replacement or a broader inspection?

A localized leak can sometimes be repaired when the surrounding roof is still serviceable. Repeated leakage, widespread shingle failure, soft decking, multiple roof layers or several failing transitions can push the project toward broader replacement. Ask the roofer to separate the condition of the roof covering from the deck, flashing, penetrations and ventilation so the recommendation is easier to evaluate.

  • Active leak or isolated flashing problem
  • Recurring leak after previous repair
  • Widespread shingle wear or missing material
  • Low-slope transition or roof-to-wall detail
  • Decking, ventilation or drainage concerns

Burnaby strata and multi-family roofs

In a condominium or many townhouse stratas, the roof is commonly part of the building exterior or common property. The Province of BC notes that strata corporations are generally responsible for common property and that the Standard Bylaws require approval before an owner alters common property or certain exterior components. Before an individual owner orders roof work, confirm responsibility with the strata council or property manager and review the strata plan and bylaws.

For a strata-controlled roof project, useful bid documents include the roof areas, access plan, insurance requirements, WorkSafeBC expectations, staging and parking rules, warranty requirements and who will review completed work.

Province of BC — common property and strata alterations →

Burnaby permit questions: repair is not the same as alteration

The City of Burnaby says minor non-structural repairs to the outside of a home do not need a building permit, while alterations to an existing building require a permit. Its home-improvement guidance also says repairs to damaged buildings, including roof repairs in restoration work, may require a building permit. Because roofing scopes vary, do not assume that a shingle repair, structural deck replacement, skylight change and broader exterior alteration all follow the same permit path.

If the work expands beyond straightforward maintenance, confirm the scope with Burnaby’s Building Department before work begins. The City currently processes alteration and addition applications through its digital permit system.

City of Burnaby — Home Improvement Permits →

What a Burnaby replacement proposal should spell out

  • Tear-off: number of existing layers and disposal.
  • Decking: what is included, plus the unit price or allowance for damaged sheets.
  • Water protection: underlayment, eave/valley membrane and low-slope transitions.
  • Flashing: walls, chimneys, skylights, plumbing vents and other penetrations.
  • Ventilation: existing vents, proposed changes and any attic-condensation concerns.
  • Finishing: gutters/fascia interaction, cleanup, magnetic nail sweep and final inspection.
  • Warranty: workmanship term, manufacturer coverage and owner maintenance conditions.

Compare roofing quotes line by line →

Burnaby roof details that can change the price

Steep or difficult access, multiple roof planes, low-slope sections, skylights, chimneys, roof decks and extensive flashing can all increase labour. Tree cover can add debris and moss pressure, while poor gutter discharge can create fascia or lower-roof problems that should be separated from the roof-covering quote.

The estimator above intentionally uses a broad range because it cannot inspect any of those details. Use it to set a budget window, then compare the contractor’s actual scope against the assumptions.

One request, one roofer

BC Quote reviews the service, city, timing and project details and routes the request to one local contractor match from the network who is suited to the job and area. The homeowner decides whether to continue after the contractor makes contact.

Last checked

Municipal and strata references on this page were checked September 28, 2026. Permit requirements can change and depend on the exact scope, so confirm the current requirement with the City or strata before construction.

Burnaby roofing FAQ

Questions homeowners ask before requesting a roofer

Does every roof replacement in Burnaby need a building permit?

Not necessarily. Permit requirements depend on the scope and whether structural or related building work is involved. For anything beyond a straightforward covering replacement, check the City of Burnaby permit and construction information or ask the contractor what approvals apply.

Can I use BC Quote for a roof leak rather than a full replacement?

Yes. The Burnaby roofing request can be used for leaks, repairs, replacement, shingles, metal, flat roofing and related roof work.

Will several roofing companies call me?

No. BC Quote is designed around one contractor per homeowner request rather than reselling the same request to a list of roofing companies.